Resetting Honeywell CK65’s Default Scanner Settings – Instructions

Target Audience: Advanced User, IT Manager
Article #: 12137


This article will guide you through the steps needed for resetting a Honeywell CK65’s default scanner settings. This process reset the suffix value of a carriage return (enter) that needed to be added to all scans.


You will need to have the CK65 mobile scanning computer with a charged battery


  1. Restore the scanner to Default:

A. Swipe up on the main screen to view all apps
B. Open the Settings app near the bottom
C. Scroll and select Honeywell Settings (with the red icon)

Navigating to the Honeywell Scanning Settings

D. Select Scanning
E. Select Internal Scanner
F. Select Default Profile

Navigating to default Scanning Settings

G. Click the three dots icon in the upper right corner.
H. Tap on Restore all defaults

Restore Defaults screen for Honeywell Scanning
  1. Set the Suffix value

A. While still in the same settings page, select Data Processing Settings.
B. Select Suffix
C. In the popup, type /x0D and press OK.

Inserting Enter (carriage return and line feed) using the suffix code \x0D.
  1. Check to see if the problem has been resolved.

Additional Comments

Tested using: Honeywell CK65 Android version 9, build# 88.00.10-(0131)

If you need further assistance, please contact us.


Was this article helpful?

Related Articles