Creating Print Job Start and End Labels – CODESOFT Instruction Article

Summary

This Instruction Article explains how to configure label designs to print a start and end label for each print run using the Layers feature in CODESOFT.

Instructions

  1. Start CODESOFT and open the label design file that requires a start and end label
  2. Select View > Layers to get the Layer window to pop up
  3. Design Start label:
    • Select the “First label of the printjob” button (eye icon and blank page preview appears on top screen segment)
    • Select the Eye icon (this causes CODESOFT to show the layout for the Start label which, when first creating it, should be blank)
    • Move Layer window out of the way and use CODESOFT to design Start label
  4. Design End label:
    • Select the “Last label of the printjob” button (eye icon and blank page preview appears on bottom screen segment)
    • Select the Eye icon (this causes CODESOFT to show the layout for the End label which, when first creating it, should be blank)
    • Use CODESOFT to design End label
  5. Save label design
  6. Test print

 Additional Comments

Sample CODESOFT v2014 label attached.

Author


Was this article helpful?

Related Articles